IEEE Standards Maintained By or Under Development By the ICC

A complete listing of the abstracts of IEEE Standards sponsored by the ICC as Maintained by IEEE-SA.

You can review the abstract for the issued or proposed Standard or Guide by choosing below. Your selection will search the IEEE Standards Server database for the document number. It is not a sophisticated search tool. It will turn up all occurrences of the requested number (a search for IEEE 404 will also discover IEEE 1404 and any contacts whose phone numbers contain the string '404'.

Looking for cable standards prepared by another organization?

IEEE 48: Test Procedure for HV AC Cable Terminations 2.5 kV-765 kV - Maintained by WG B01.
IEEE 82: Test Procedure for Impulse Tests on Insulated Conductors - Maintained by WG C14.
IEEE 83: Recommended Practice for Radial Power Factor Tests on Insulating Tapes in Paper Insulated Cables - Previously Maintained by SC 12, Withdrawn 01-2000.
IEEE 383: Qualification of Class 1E Cables for Nuclear Power Generating Stations - Maintained by WG D10
IEEE 386: Seperable Insulated Connectors System for Power Distribution Systems Above 600V, Maintained by WG B16.
IEEE 400: Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems - Maintained by WG F01.
IEEE 400.1: Guide for Field Testing of Laminated Dielectric, Shielded Power Cable Systems rated 5kV and above with High Direct Current Voltage - Maintained by WG F02.
IEEE 400.2: Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency Less Than 1 HZ - Maintained by WG F03.
IEEE 400.3: Guide for Partial Discharge Based on Field Diagonstic Testing of Shielded Power Cable Systems - Maintained by WG F04.
IEEE 400.4: Guide for Field testing of Shielded Power Cable Systems Rated 5kV and Above With Damped Alternating Current Voltage (DAC) - Maintained by WG F05.
IEEE 404: Standard for Extruded and Laminated Dielectric Shielded cable joints Rated 2500 to 500,000 V - Maintained by WG B02.
IEEE 442: Guide for Soil Thermal Resistivity Measurements - Maintained by WG C25.
IEEE P422: Guide for the Design of Cable and Raceway Systems for Electric Generating Stations - Maintained by WG D14.
IEEE 495: Guide for testing faulted circuit indicators - Maintained by WG B17.
IEEE 532: Guide for Selecting and Testing Jackets for Power, Instrumentation and Control Cables - Maintained by WG A07.
IEEE 575: Guide for Application of Sheath Bonding Methods - Maintained by WG C02.
IEEE 592.: Standard for Exposed Semi-conducting shields on HV cable joints and seperable Insulated connectors. - Maintained by WG B03.
IEEE 634: Cable Penetration Fire Stop Qualification Test - Maintained by WG D08.
IEEE 635: Guide for Selection and Design of Aluminum Cable Sheaths for Power Cables - Maintained by WG A15.
IEEE 737: Guide for Testing of Weathering Polymeric Cable Accessories - Currently Withdrawn and Inactive.
IEEE 816: Tests for Smoke, Toxicity and Corrosive Products of Cable Combustion - Currently Withdrawn and Inactive.
IEEE 817: Test Procedure for Flame Retardant Coatings Applied to Insulated Cable - Currently Withdrawn and Inactive.
IEEE 835: Standard Power Cable Ampacity Tables - Maintained by WG C01.
IEEE 848: Standard Procedure for the Determination of the Ampacity Derating of Fire-Protected Cables - Maintained by WG D13.
IEEE 851: Application of Flame Retardant Coatings and Tapes - Currently Withdrawn and Inactive.
IEEE 971: Guide for Distribution Cable Installation Methods Duct System - Maintained by WG C12.
IEEE 972: Guide for Connection of Insulated Aluminum Conductors - Currently Withdrawn and Inactive.
IEEE 1026: Test Methods for Determination of Compatibility of Materials with Conductive Polymeric Insulation Shield and Jackets - Maintained by WG B04. Note that this project was withdrawn and is currently inactive.
IEEE 1034: Fire and Smoke Test Procedure for Electrical Cables - Currently Withdrawn and Inactive.
IEEE 1047: Test Procedure for Measuring the Resistance of Semi-Conducting Jackets on Underground Distribution Cable - Currently Withdrawn and Inactive.
IEEE 1120: Guide for the Design and Installation of Submarine Power and Communication Cables - Maintained by WG C11.
IEEE 1125: Guide for Moisture Measurement and Handling in CGIT - Transferred to Substation Committee 4-16-2003.
IEEE 1142: Guide for the Selection, Testing, Application and Installation of Cables Utilizing Radial and/or Longitudinal Moisture Barriers - Maintained by WG A11.
IEEE 1143: Guide on Shielding Practice on Low-Voltage Cables - Maintained by WG D11.
IEEE 1185: Guide for Installation Methods for Generating Station Cables - Maintained by WG D05.
IEEE P1186: Recommended Practices for the Evaluation of installed Cable Systems for Class IE Circuits in Nuclear Power Generating Stations - Maintained by WG D7. Note that this project was withdrawn and is currently inactive.
IEEE 1197: Diagnosis and Classification of Cable, Joint an Termination Troubles on Extruded Dielectric Cables - Currently Withdrawn and Inactive.
IEEE 1202: Standard for Flame Propagation Testing of Wire & Cable - Maintained by WG D15.
IEEE 1210: Tests for Determining Compatibility of Cable Lubricants with Wire and Cable - Maintained by WG A08.
IEEE 1215: Guide for Application of Separable Connectors in the Electric Power Industry - Maintained by WG B18.
IEEE 1216: Guide for Application of Faulted Circuit Indicators for 200A, Single-Phase URD - Maintained by WG B17.
IEEE 1234: Guide for Fault Locating on Shielded Power Cables for Utility Application - Maintained by WG C21
IEEE 1235: Standard Test Methods for Identifying URD Cable Jackets and/or Conduits - Maintained by WG A05
IEEE 1242: Guide for selecting & specifying Cables for Petrochemical Plants - Maintained by WG D03.
IEEE 1254: Guide for Soil Stability Measurements and Data Evaluation - Maintained by WG C20.
IEEE 1299* Now IEEE C62.22.1: Guide for the Connection of Surge Arresters to Protect Insulated Shielded Electric Power Cable Systems - Maintained by WG B06.
IEEE 1300: Guide for Cable Connections for Gas Insulated Substations - Maintained by WG B05.
IEEE 1333: Guide for Installation of T&D cable circuits using Guided Horizontal Drilling. - Maintained by WG C13. Note that this project was withdrawn and is currently inactive.
IEEE 1406: Guide to the Use of Gas-In-Fluid Analysis for Electric Power Cable Systems - Maintained by WG C05
IEEE 1407: Guide for Accelerated Aging Tests for Medium-Voltage Extrude Dielectric Power Cables Using Water Filled Tanks - Maintained by WG A13
IEEE 1425: Guide for the Evaluation of the Remaining Life of Impregnated Paper Insulated Transmission Cable Systems - Maintained by WG C04
IEEE P1428: Guide for Installation Methods for Fiber Optic Cables in Electric Power Generating Stations and in Industrial Facilities - Maintained by WG D06.
IEEE P1493: Guide for the Evaluation of Solvents Used for Cleaning Electrical Cables and Accessories, maintained by WG B09
IEEE P1508: Standard for Solder Sweated Split Tinned Copper Connectors 5kV-35kV, maintained by WG B08. Note that this standard has been withdrawn.
IEEE P1511: Guide for Investigating and Analyzing Power Cable, Joint and Termination Failures on Systems Rated 5kV through 46 kV, maintained by WG A18/B12
IEEE P1511.1: Guide for Investigating and Analyzing Shielded Power Cable Failures on Systems Rated 5 kV Through 46 kV, maintained by WG A18/B12
IEEE P1617: Guide for Detection, Mitigation and Control of Concentric Neutral Corrosion in Medium Voltage Underground Cables, maintained by WG F07
IEEE P1637: Guide to Select Terminations for Shielded Power Cables 5-46kV, maintained by WG B10
IEEE P1659: Standard for connectors used in underground cable splices and terminators of primary network system, maintained by WG B08
IEEE P1682: Standard for Qualifying Fiber Optic Cables, Connections, and Optical Fiber Splices for Use in Safety Systems of Nuclear Power Generating Stations - Maintained by WG D16.
IEEE P1717: Standard For Testing Circuit Integrity Cables Using the Hydrocarbon Pool Fire Test Protocol, maintained by WG D17
IEEE P1718: Guide for Temperature Monitoring of Cable Systems, maintained by WG C24
IEEE P1727: Guideline For Working Procedures On Underground Transmission Circuits With Induced Voltage, maintained by WG C29
IEEE P1728: Guide for the Use of Extruded Shields, maintained by WG A17
IEEE P1793: Guide for Planning & Designing Transition Facilities Between Overhead & Underground Transmission Lines, maintained by WG C23
IEEE P1810: Guide for Installation of Circuit Integrity Cables in Petrochemical Plants, maintained by WG D18
IEEE P1816: Guide for Preparation of Extruded Dielectric, Shielded Cables Rated 2.5kV through 46kV for the Installation of Cable Accessories , maintained by WG B19
IEEE P1844: Standard for Circuit Integrity Testing of Cables Used in Nuclear Plants, maintained by WG D19

Return to the ICC Homepage

This page last revised on 04/10/12

IEEE prohibits discrimination, harassment and bullying. For more information, visit ieee.org/web/aboutus/whatis/policies/p9-26.html

IEEE-ICC-PES