Subcommittee D is tasked with cable systems for power, control, signal, data, communication, and fiber optic applications for use in generating stations, substations, industrial facilities, shipboards, military installations, submarines, mining, and transit/locomotive cars. These cables are direct buried, pulled in duct banks, conduits, ducts or wire ways, or installed in trays, air handling plenums, cabinets, enclosures and other non-T&D applications of insulated conductors. Testing and installation guidance for these applications is also within the scope of this group. The group develops standards and guidelines and provides opportunity for technical discussion. Specifically excluded are T&D cables for use on land applications.
The Generating Station and Industrial Cables Subcommittee’s mission is to continually advance the understanding and improve the application of insulated conductors and fiber optic cables.
Group |
Group |
Group Name |
Chairmen |
INACTIVE |
Shipboard Cables | ||
INACTIVE |
Industrial and Commercial Cables | ||
|
D (P1242) |
Guide for Selecting and Specifying Cables for Petrochemical Plants (IEEE 1242)[Joint with IAS/PCIC] | Bow/Maldonado | |
D |
Smoke, Toxicity and Corrosive Products of Cable Combustion | Durland/Vacant | |
W (P1185) |
Station Cable Installation Criteria (IEEE 1185) | Merando/Graham | |
INACTIVE |
Fiber Optic Cables (IEEE 1428) | White/Vacant | |
INACTIVE |
Evaluation of Installed Cable Systems | ||
INACTIVE |
Cable Penetration Fire Stop Qualification Test (IEEE 634) | White/Vacant | |
INACTIVE |
Ampacity Derating Factors for Installed Cable Configuration | ||
| W (P383) | Class 1E Cables for Nuclear Plants (IEEE 383)[Joint with NPEC/SC2] | Konnik/Gwal | |
|
W (P1143) |
Guide on Shielding Practice for Low Voltage Cables (IEEE 1143) | Bow/Bayer | |
INACTIVE |
Plant Life Extension | ||
W (P848) |
Ampacity Derating of Fire Protected Cable (IEEE 848) | Gwal/Spear | |
W (P422) |
Guide for the Design of Cable Systems (P422) [Joint with PGC] |
Merando/Bloethe | |
W (P1202 Reaffirmation) |
Vertical Tray Flame Test Protocol (IEEE 1202) | Hills/Taylor | |
W (P1682) |
Qualification of Fiber Optic Cable (IEEE P1682)[Joint with NPEC/SC2] | Pirrong/Korash | |
W (P1717) |
Standard For Testing Circuit Integrity Cables Using the Hydrocarbon Pool Fire Test Protocol (IEEE P1717) | Maldonado/Smith | |
|
W (P1810) |
Guide for the Selection and Installation of Fire-Rated, Circuit Integrity Cables for Safety, Critical, and Emergency Shutdown Systems in Petroleum and Chemical Industries (IEEE P1810) |
Shoshani/Bayer | |
| D19 | D (P1844) | Standard For Testing Fire Resistive Cables For Use In Nuclear Facilities | Taylor/Shoshani |
| D20 | D | Submergence Testing of Cables For Use in Nuclear Facilities | Depriest/Fleming |
xW = Working Group (Prepares a document such as a standard, guide or paper) D = Discussion Group (Provides a forum for discussion on a focused topic.) Working groups have the PAR # in parenthesis.
Return to the ICC Subcommittee page
