Insulated Conductors Committee

Return to: E10 - CIGRE/IEC International Activities

IEC-ICC Liason Ken Bow (k.bow@ieee.org Phone: 989-695-4659) has posted an announcement from the USTAG concerning documents of IEC TC 20 that are up for comments.  Ken would appreciate any input from other ICC members on these documents.  If you see any of these documents you would like to help comment on, please contact Ken, and he will help to get your comments heard.

If you would like access to these documents, you need to be a member of the US TAG. See the directions for becoming a member at ansi.org/usnc, or call 212-642-4900. Please contact Ken Bow if you have questions or comments on these documents at k.bow@ieee.org, phone 989-695-4659. For more information on international activities within the the ICC, please attend the E10D discussion group meeting

Message from USTAG:

Dear USNC of IEC TC 20 TAG WG Members,
A total of 40 new Committee Drafts for Comment are posted, all of which are due March 20, 2009.  Would you please see attached corresponding CDs and CD comment forms for your return of comments/ recommendations no later than 3/10 or sooner.
There will be another email following this one with 20/1024/CD - 20/1047/CD
If you have any questions please let me know.
Thanks,
Eric
Committee 20   
20/1008/CD2009-01-16
2009-03-20		IEC 60840, Ed. 4.0: Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) - Test methods and requirements
20/1009/CD2009-01-16
2009-03-20		IEC 62067 Ed. 2.0: Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) - Test methods and requirements
20/1010/CD2009-01-16
2009-03-20		IEC 60811-100 Ed.1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General
20/1011/CD2009-01-16
2009-03-20		IEC 60811-201 Ed.1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
20/1012/CD2009-01-16
2009-03-20		IEC 60811-202 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
20/1013/CD2009-01-16
2009-03-20		IEC 60811-203 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions
20/1014/CD2009-01-16
2009-03-20		IEC 60811-301 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 °C of filling compounds
20/1015/CD2009-01-16
2009-03-20		IEC 60811-302 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the D.C. resistivity at 23 °C and 100 °C of filling compounds
20/1016/CD2009-01-16
2009-03-20		IEC 60811-401 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Environmental tests -Thermal ageing methods. Ageing in an air oven
20/1017/CD2009-01-16
2009-03-20		IEC 60811-402 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Environmental tests - Water absorption tests
20/1018/CD2009-01-16
2009-03-20		IEC 60811-403 Ed. 1.0. Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Environmental tests - Ozone resistance test on elastomeric compounds
20/1019/CD2009-01-16
2009-03-20		IEC 60811-404 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Environmental tests - Mineral oil immersion tests for sheaths made with elastomeric compounds
20/1020/CD2009-01-16
2009-03-20		IEC 60811-405 Ed.1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Environmental tests -Thermal stability test for PVC insulations and PVC sheaths
20/1021/CD2009-01-16
2009-03-20		IEC 60811-406 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Environmental tests -Resistance to environmental stress cracking of polyethylene and polypropylene compounds
20/1022/CD2009-01-16
2009-03-20		IEC 60811-407 Ed. 1.0. Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Environmental tests - Measurement of mass increase of polyethylene and polypropylene compounds
20/1023/CD2009-01-16
2009-03-20		IEC 60811-408 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Environmental tests -Long term stability test of polyethylene and polypropylene compounds
20/1024/CD2009-01-16
2009-03-20		IEC 60811-409 Ed. 1.0. Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Environmental tests - Loss of mass test for thermoplastic insulations and sheaths
20/1025/CD2009-01-16
2009-03-20		IEC 60811-410 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Environmental tests -Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
20/1026/CD2009-01-16
2009-03-20		IEC 60811-411 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Environmental tests - Low temperature brittleness of filling compounds
20/1027/CD2009-01-16
2009-03-20		IEC 60811-412 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Environmental tests - Thermal ageing methods - Ageing in an air bomb
20/1028/CD2009-01-16
2009-03-20		IEC 60811-501 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
20/1029/CD2009-01-16
2009-03-20		IEC 60811-502 Ed. 1.0. Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations
20/1030/CD2009-01-16
2009-03-20		IEC 60811-503 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths
20/1031/CD2009-01-16
2009-03-20		IEC 60811-504 Ed. 1.0. Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths
20/1032/CD2009-01-16
2009-03-20		IEC 60811-505 Ed. 1.0. Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths
20/1033/CD2009-01-16
2009-03-20		IEC 60811-506 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths
20/1034/CD2009-01-16
2009-03-20		IEC 60811-507 Ed.1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials
20/1035/CD2009-01-16
2009-03-20		IEC 60811-508 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
20/1036/CD2009-01-16
2009-03-20		IEC 60811-509 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking
20/1037/CD2009-01-16
2009-03-20		IEC 60811-510 Ed. 1.0. Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air
20/1038/CD2009-01-16
2009-03-20		IEC 60811-511 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and
polypropylene compounds
20/1039/CD2009-01-16
2009-03-20		IEC 60811-512 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Tensile strength and elongation at break after conditioning at elevated temperature - Methods specific to polyethylene and polypropylene compounds
20/1040/CD2009-01-16
2009-03-20		IEC 60811-513 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning
20/1041/CD2009-01-16
2009-03-20		IEC 60811-601 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical Tests - Measurement of the drop-point of filling compounds
20/1042/CD2009-01-16
2009-03-20		IEC 60811-602 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical Tests - Separation of oil in filling compounds
20/1043/CD2009-01-16
2009-03-20		IEC 60811-603 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Physical Tests - Measurement of total acid number of filling compounds.
20/1044/CD2009-01-16
2009-03-20		IEC 60811-604 Ed.1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical Tests - Measurement of absence of corrosive components in filling compounds
20/1045/CD2009-01-16
2009-03-20		IEC 60811-605 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 605 : Physical Tests - Measurement of carbon black and/or mineral filler in polyethylene compounds
20/1046/CD2009-01-16
2009-03-20		IEC 60811-606 Ed.1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical Tests - Methods for determining the density
20/1047/CD2009-01-16
2009-03-20		IEC 60811-607 Ed. 1.0: Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical test - Test for the assessment of carbon black dispersion in Polyethylene and Polypropylene
   
 
Eric Schweitzer
USNC of IEC TC 20 TAG Administrator
NEMA
Tel: 703-841-3276
Fax: 703-841-3376
This page last revised on 04/10/12
IEEE prohibits discrimination, harassment and bullying. For more information, visit ieee.org/web/aboutus/whatis/policies/p9-26.html

IEEE-ICC-PES